After you are not able to repair a particular "unbootable" laptop hard disk, you may well save the information it contains to a desktop computer with the use of the "slave drive" treatment method. If the drive of the laptop has never broken off mechanically, and this disk is actually "readable" - you'll be able to conserve delivering data onto your fiberchannel raid .
Separate the battery in the laptop. Next, take available the generate carefully, taking care of the holds that defend it. Shut off the laptop computer. Remove most connections of cable relating to the back. Also, remove side cover of the chassis.
Get the cable that connects to the 15000 hard drive . Examine this cable. You enables another nasty connector to be had. Connect some laptop to the IDE adaptor. Set adapter to figure as "Slave drive". Connect hard drive of laptop to the last end of adapter. After relating the hard disk to the PC, put one more cable in the available ports on motherboard.
Plug last end with SATA cable in the drive involving laptop. Boot the laptop computer after connecting rear cables. Using that mouse, right press 'Start' and be able to select Discover. Check to your laptop's drive inside listings. It appears in the form of new propels. Copy any sort of documents relating to the drive involving laptop in a folder in the PC. Pull the plug on desktop laptop computer and remove all backside cables once more. Also, unplug the storage device of netbook from usb case of hard drive and restore side covers on computer's desktop.
Now plug in every one rear cables and sneaker it once again. Remove that adapter from the drive involving laptop, replace this old one which has a new an individual, and reinstall computer on hard disk. Copy this saved file types from computer onto some sort of USB get for transferring them back to the brand-new or mended laptop drive.
Separate the battery in the laptop. Next, take available the generate carefully, taking care of the holds that defend it. Shut off the laptop computer. Remove most connections of cable relating to the back. Also, remove side cover of the chassis.
Get the cable that connects to the 15000 hard drive . Examine this cable. You enables another nasty connector to be had. Connect some laptop to the IDE adaptor. Set adapter to figure as "Slave drive". Connect hard drive of laptop to the last end of adapter. After relating the hard disk to the PC, put one more cable in the available ports on motherboard.
Plug last end with SATA cable in the drive involving laptop. Boot the laptop computer after connecting rear cables. Using that mouse, right press 'Start' and be able to select Discover. Check to your laptop's drive inside listings. It appears in the form of new propels. Copy any sort of documents relating to the drive involving laptop in a folder in the PC. Pull the plug on desktop laptop computer and remove all backside cables once more. Also, unplug the storage device of netbook from usb case of hard drive and restore side covers on computer's desktop.
Now plug in every one rear cables and sneaker it once again. Remove that adapter from the drive involving laptop, replace this old one which has a new an individual, and reinstall computer on hard disk. Copy this saved file types from computer onto some sort of USB get for transferring them back to the brand-new or mended laptop drive.
About the Author:
If you are tired of finding a good scsi hard drive , check out the best services of 146gb ultra320 scsi
No comments:
Post a Comment